Efficient Design of Thin Wall Seating Made of a Single Piece of Heavy-Duty Corrugated Cardboard

Materials

Berta Suarez¹  Gregorio Romero¹  Luisa M. Muneta¹  Juan D. Sanz-Bobi¹ 

[1] Mechanical Engineering Department, Escuela Técnica Superior de Ingenieros Industriales, Universidad Politécnica de Madrid, C/José Gutiérrez Abascal, 2, 28006 Madrid, Spain;

关键词: composite sandwich structures;    thin-walled structures;    anisotropic material;    corrugated core;    homogenization approach;    first-order shear deformation theory;   

DOI  :  10.3390/ma14216645

来源: DOAJ

【 摘 要 】

Corrugated cardboard has waved cores with small flutes that prevent the use of detailed numerical models of whole structures. Many homogenization methods in the literature overcome this drawback by defining equivalent homogeneous plates with the same mechanical behaviour at a macro-mechanical scale. However, few homogenization works have considered complete structures, focusing mainly on beams or plates. For the first time, this study explores the application of homogenization approaches to larger structures as an aid in their design process. We also considered triple-wall boards rather than single- and double-wall configurations commonly addressed in the literature. To this end, we adapted the homogenization methods proposed by Talbi and Duong to analyze thin-walled stools made of triple-wall corrugated cardboard. Using a progressive design process, we performed an efficient stool design by removing material zones with lower stresses, with 35% less material, 35% lower vertical deflections, and 66% lower stresses than the initial design. Unlike other corrugated cardboard stools, this design comprises just one folded piece instead of three, thus saving storage space. These results demonstrate the utility of homogenization techniques as an aid in the design process of whole structures made of corrugated cardboard. Further research will consider buckling analysis.

【 授权许可】

Unknown