期刊论文详细信息
Materials
Laser Micro-Texturing of Sintered Tool Materials Surface
Adam Čermák1  Pavel Kožmín1  Małgorzata Dziekońska2  Daniel Pakuła2  Marcin Staszuk2 
[1] HOFMEISTER s.r.o, Mezi Ploty Street 12, 326 00 Pilsen, Czech Republic;Institute of Engineering Materials and Biomaterials, Silesian University of Technology, Konarskiego Street 18A, 44-100 Gliwice, Poland;
关键词: cemented carbides;    sialon tool ceramics;    laser texturing;    laser induced periodic surface structures (lipss);   
DOI  :  10.3390/ma12193152
来源: DOAJ
【 摘 要 】

The purpose of this paper is to show the effect of tool materials surface treatment while using laser texturing on the structure and properties of cemented carbides and sialon ceramics. The tests were made on multi-point inserts subjected laser texturization and honeycomb-like texture was obtained. Comprehensive investigations in the scanning electron microscope (SEM) were made. Morphology was examined by the use of atomic forces microscope (AFM) and confocal microscope. The chemical composition of the tested materials using energy-dispersive X-ray spectrometer (EDS) was investigated. Moreover, exploitative properties, including wear resistance using the "pin on disc" method and roughness, were also tested. It was found that the laser texturing provides a suitable modification of the structure improving tribological properties. Tests suggest that laser texturing can contribute to the durability of cutting tool’s edge, which qualifies this type of surface treatment for wide industrial applications.

【 授权许可】

Unknown   

  文献评价指标  
  下载次数:0次 浏览次数:1次