A novel high torque density six‐phase axial‐flux permanent magnet synchronous motor with 60° phase‐belt toroidal winding configuration

IET Electric Power Applications

Rui Nie¹  Jikai Si¹  Can Feng¹  Yihua Hu²  Yingsheng Li³ 

[1]College of Electric Engineering Zhengzhou University Zhengzhou Henan China

[2]Department of Electronic Engineering University of York York UK

[3]Zhengzhou Runhua Intelligent Equipment Co., Ltd Zhengzhou China

关键词: torque;    air gaps;    electric potential;    stators;    synchronous motors;    fault tolerance;   

DOI  :  10.1049/elp2.12133

来源: DOAJ

【 摘 要 】

Abstract The three‐phase permanent magnet synchronous motor (three‐phase PMSM) has gained much popularity in many applications due to its various advantages. In addition, due to the good fault tolerance, simple inverter circuit structure and high torque density, the six‐phase PMSM has better prospects than three‐phase PMSM in biomedical devices, electric vehicles and other fields with high reliability requirements. In this study, a six‐phase axial‐flux PMSM inherently without cogging torque is proposed to improve torque density, which equips the 60° phase‐belt toroidal winding (60°TW) and slotless stator core. Based on the same effective volume, permanent magnet material, power grade and the other major motor parameters, two six‐phase PMSMs with 30° phase‐belt toroidal winding (30°TW) and 60°TW are designed, respectively. The armature reaction field, air gap magnetic density, back‐electromotive force, output torque, loss characteristic and torque‐speed characteristic are compared by using three‐dimensional (3D) finite‐element models in detail. Finally, the experimental test is carried out using the prototype of three‐phase PMSM with 120° phase‐belt toroidal winding. The experimental results indirectly verify the feasibility of 60° phase‐belt toroidal winding and correctness of 3D FEM. The 3D FEM analysis results are presented to show that torque density of the proposed six‐phase PMSM with 60°TW is improved in comparison to the six‐phase PMSM with 30°TW. Index Terms—60° phase‐belt toroidal winding, axial flux, six‐phase permanent magnet synchronous motor, torque density

【 授权许可】

Unknown