Tehnički Vjesnik | |
Optimisation of metal-to-composite bonded joints with various adhesive layer configurations using finite element method | |
Petr Bernardin1  František Sedláček1  Václava Lašová1  | |
[1] University of West Bohemia in Pilsen, Department of Machine Design, Univerzitní 22, 306 14 Plzeň, Czech Republic; | |
关键词: bonded joints; composite material; finite element analysis; metal-to-composite joints; optimisation cycle; | |
DOI : | |
来源: DOAJ |
【 摘 要 】
The purpose of this paper was to optimise several bonded joints using the optimisation cycle implemented in finite element analysis (FEA) software. These bonded joints were compared to each other based on different geometry and strength obtained by the optimisation cycle. For these bonded joints the bonded surfaces had various shapes and parameters. The impact of the length, thickness and cross-section angle of the adhesive layer on the resulting stress level and the final relative twist angle between a composite tube and a steel flange have been investigated. Specimens with cylindrical bonding surface were used as the reference shape, which influenced the calculated strength of the specimens. The shape of the bonded joint is in accordance with the bonded joints used for transmitting torque to machine tool spindles in machine tool design and results of this research will be used for similar applications.
【 授权许可】
Unknown