Novel Switching Frequency FCS-MPC of PMSG for Grid-Connected Wind Energy Conversion System with Coordinated Low Voltage Ride Through

Electronics

Abo-HashimaM. Elsayed¹  AhmedA. Zaki Diab¹  YahiaS. Mohamed¹  AsmaaA. Ghany¹  E.G. Shehata¹  Pierluigi Siano²  HassanHaes Alhelou³ 

[1] Department of Electrical Engineering, Minia University, Minia 61111, Egypt;Department of Management & Innovation Systems, University of Salerno, 84084 Salerno, Italy;School of Electrical and Electronic Engineering, University College Dublin, Belfield, Dublin 4, Ireland;

关键词: wind energy;    grid integration;    PMSG;    fast model predictive controller;    constant switching frequency;    low voltage ride through;   

DOI  :  10.3390/electronics10040492

来源: DOAJ

【 摘 要 】

The integration of wind energy systems (WECS) into the power grid through power electronic converters should ensure the high performance of the control system. In spite of several advantages of conventional Finite control set-model predictive controller (FCS-MPC), variable switching frequency and high computational burden are considered its main drawbacks. In this paper, a fast FCS-MPC of a machine side converter (MSC) of direct-driven permanent magnet synchronous generator (PMSG) based wind turbines for wind energy conversion system is proposed. The wind energy conversion system has been realized using a direct driven PMSG and a full-scale back-to-back power converter. The proposed controller is designed to reduce the required calculations in each horizon. In addition, the performance of conventional FCS-MPC is compared with the proposed method, and an improvement in total harmonic distortion spectra and simulation time required even when imposing a lower sampling frequency was found. To overcome the variable switching frequency problem, a modulation algorithm is introduced in the minimization process of modulated FCS-MPC. To keep the proposed system attached to the utility during a fault, a coordinated pitch angle control and low voltage-ride through (LVRT) algorithm is designed and inserted in the vector control of the grid side converter (GSC) to supply reactive power to the grid during fault for ensuring safe operation of the inverter and meeting the grid code requirements. The effectiveness of the proposed controller is illustrated using simulation results under different operating conditions.

【 授权许可】

Unknown