Smart Non-Invasive Hemoglobin Measurement Using Portable Embedded Technology

International Journal of Online and Biomedical Engineering

Usha Kumari Chintalapati¹  Padma Tatiparti¹ 

[1] GOKARAJU RANGARAJU INSTITUTE OF ENGINEERING AND TECHNOLOGY;

关键词: hemoglobin, plethysmography, oxygen saturation, microcontroller, arduino ide, matlab, android mobile app, think speak;   

DOI  :  10.3991/ijoe.v16i15.18949

来源: DOAJ

【 摘 要 】

Hemoglobin plays a major role for the existence of the healthy human being it carries oxygen supply to every cell for its survival in the entire body. As its level varies from person to person between 12-17 grams per deciliter if very high or low cause diseases. Usually low hemoglobin cause anemia in many of the women during pregnancy. In the present article the hemoglobin measurement is done noninvasively using the photoplethysmography method at the fingertip by Infrared LED with a wavelength of (880 – 940) nm and Red LED with wavelength of 660nm. The empirical calculation of Hemoglobin estimation is carried indirectly through model of oxygen saturation in skin-tissue- bone attenuation of the light on to the extremities. The analysis is supported by the Arduino IDE and MATLAB toolboxes for filtering the noise in signal and processing for target parameters. Further these real time parameters were sent to expertise to check for corrective ness and with the actual invasive methods   for diagnosing its course of action. Internet of Things (IOT) technology to the outside world communication through Android mobile App.

【 授权许可】

Unknown