Microstructure, tensile properties and formability of ultrafine-grained Al–Mn square plates processed by Incremental ECAP

Materials & Design

Małgorzata Lewandowska¹  Lech Olejnik²  Marta Ciemiorek² 

[1] Corresponding author.;Faculty of Materials Science and Engineering, Warsaw University of Technology, Wołoska St. 141, 02-507 Warsaw, Poland;

关键词: Aluminium alloys;    Ultrafine-grained plates;    Formability;    Incremental Equal Channel Angular Pressing;    Mechanical properties;    Microstructure;   

DOI  :  

来源: DOAJ

【 摘 要 】

In the article, plates of commercial alloy 3003 were processed by Incremental Equal Channel Angular Pressing (I-ECAP). A microstructural evaluation revealed that it was possible to obtain a high fraction of high-angle grain boundaries, exceeding 63%, and an average grain size of 0.5 μm. Tensile testing revealed that the material has low ductility, but high mechanical strength, 120% higher than that of the initial material. Plate formability was described using the Lankford parameter and evaluated based on the crystallographic texture. It was concluded that the mean anisotropy was almost identical to that of the initial material, but planar anisotropy was reduced almost to 0. This was explained on the basis of the crystallographic texture. It appears that I-ECAP processed plates have qualities that could make them suitable for further processing by means of metal forming methods.

【 授权许可】

Unknown