Coupling of External Electric Circuits with Computational Domains

J

Riccardo Scorretti¹ 

[1] Univ Lyon, Université Claude Bernard Lyon 1, INSA Lyon, ECLyon, CNRS, Ampère, F-69100 Villeurbanne, France;

关键词: finite element analysis;    electrical circuits;    eddy currents;   

DOI  :  10.3390/j4040059

来源: DOAJ

【 摘 要 】

Coupling of electrical circuits with 2D and 3D computational domains is very important for practical applications. To this aim, the notions of “electrical current” and “voltage” must be defined precisely and linked with local quantities (i.e., fields and potentials) in the computational domain. Apart from the static case, the definition of voltage is more complex than it may appear at a first glance, and it is usually tainted by unspoken and/or not justified assumptions. The purpose of this work is twofold: on one hand, to shed light on the definition and on the physical meaning of voltage in the case of time varying quasi-static fields and, on the other hand, to show how to establish coupling equations between lumped parameters circuit model and 2D/3D computational domains. It is demonstrated that a precise physical significance can be given to the voltage in terms of power balance only (the notion of potential is unnecessary). A couple of original operators which allow to express voltages and currents are introduced. Based on a critical analysis of the research literature, it is shown that existing coupling formulas can all be rewritten as particular cases of these two operators. The developed analysis is independent from any computational method and can be used to devise new coupling formulas.

【 授权许可】

Unknown