In Vitro Modeling of Implantable Cardiac Pacemakers Submitted to Conducted Disturbance

International Journal of Online and Biomedical Engineering

Abdesselam Babouri¹  Karim Djennah²  Abdelaziz Ladjimi² 

[1] Université 8 Mai 1945 Guelma, Laboratoire de Génie Electrique (LGEG), BP. 401, Guelma, 24000, Algérie.;Université 8 Mai 1945 Guelma, Laboratoire de Génie Electrique (LGEG), BP. 401, Guelma, 24000, Algérie;

关键词: Electromagnetic compatibility;    digital modeling;    impedance method;    Low frequency;    EMF;    cardiac pacemaker.;   

DOI  :  10.3991/ijoe.v18i01.27289

来源: DOAJ

【 摘 要 】

The work presented describes the modeling of a measurement bench in the presence of an implantable single-chamber pacemaker in vitro subjected to a conducted disturbance. The source of disturbance is a sinusoidal electrical signal with amplitude of 10 V; the frequency ranges studied correspond to the frequencies of the electrical distribution network (50/60 Hz) and to the frequencies of domestic applications (10/25KHz). The numerical simulations were carried out according to two methods, the first based on the finite element method using the Comsol multiphysics software, the second is based on the impedance method. The results obtained by the two methods are in good agreement, and this will allow us to calculate the voltage induced between the ends of the stimulator. These results allowed us to validate the proposed model.

【 授权许可】

Unknown