Experimental Study on Mechanism of Wave-Induced Liquefaction of Sand-Clay Seabed

Journal of Marine Science and Engineering

Jun Zhang¹  Changkuan Zhang¹  Xindi Chen¹  Qin Jiang¹  Dongsheng Jeng²  Lizhu Wang³ 

[1] College of Harbor, Coastal and Offshore Engineering, Hohai University, Nanjing 210098, China;School of Engineering and Built Environment, Griffith University Gold Coast Campus, GoldCoast 4222, Australia;School of Marine Science and Engineering, Nanjing Normal University, Nanjing 210046, China;

关键词: liquefaction;    clay content;    sand;    waves;    microfabric;    mechanism;   

DOI  :  10.3390/jmse8020066

来源: DOAJ

【 摘 要 】

In this study, a series of laboratory experiments for the response of wave induced clay-sand seabed were carried out to clarify the mechanism of liquefaction of clayey seabed. The experiments were conducted in an 80 m long wave flume. In the tests, the sand-clay beds were mixed with various clay contents (CC) from 0.5% to 15% and were tested for given wave conditions. The pore water pressure and the water elevation were measured in each test. Soil properties tests and scanning electron microscope (SEM) experiments on different seabed samples were carried out to further explore the mechanism of liquefaction. The experimental results indicated that the amplitude and accumulation of the excess pore water pressure (EPP) varied with different CC in the sand-clay bed. With the introduction of CC, micro-structure and properties (such as permeability and compressibility) of bed soils changed. Sand-clay bed presented more susceptibility to liquefy compared with pure sand bed. CC promoted seabed liquefaction, even if the added amount was very small (CC is 0.5%), however when CC exceeded a certain value (10% in this study), the mixed bed will not be liquefied. This phenomenon can be well explained by the micro-structure of sand-clay bed. CC within a sandy seabed, does not only affect the permeability, but also change the compressibility of seabed soils. For example, the microfabric of seabed vulnerable to liquefaction is loose. Clay aggregations generally gathered at the sand particle contact points. This microfabric is easily compressed under wave loads and allowed pore water to flow, resulting in the accumulation of pore water pressure. On the other hand, the microfabric of seabed that was resistant to liquefaction appeared to be more compact. Due to clay-filled gaps between the sand particles, the pore water is more difficult to flow when seabed was compressed. Furthermore, the tendency of seabed liquefaction is closely related to CC.

【 授权许可】

Unknown