Data on the Validation to Determine the Material Thermal Properties Estimation Via a One-Dimensional Transient Convection Model

Data in Brief

Daniel S. Stutts¹  Lauren B. Tomanek² 

[1]Corresponding author.

[2]Department of Mechanical and Aerospace Engineering, Missouri University of Science and Technology, Rolla, MO 65409, USA

关键词: Thermal conductivity;    Additive manufacturing;    Analytical model;    Parameter estimation;    One-dimensional;    Transient analysis;   

DOI  :  

来源: DOAJ

【 摘 要 】

These data were acquired to estimate the parameters of a closed form solution of a one-dimensional transient convection heat diffusion PDE. The purpose was to demonstrate that the model could be used to determine the thermal conductivity. The system was tested for a wide range of thermal conductivity, 15-400 W/mK, in order to verify that the method was applicable for various materials. The data reported here refer to the study in the research articles, “Material Thermal Properties Estimation Via a One-Dimensional Transient Convection Model” [1] and “Influence of porosity on the thermal, electrical, and mechanical performance of selective laser melted stainless steel” [2]. The dataset contains the raw data obtained from the temperature acquisition system as well as the processed results from a Python program to determine the thermal conductivity from a forced convection, transient one-dimensional heat diffusion equation.

【 授权许可】

Unknown