Conceptual Design of a High-Speed Wire EDM Robotic End-Effector Based on a Systematic Review Followed by TRIZ

Machines

John Mo¹  Cees Bil¹  Xiangzhi Wang¹  Songlin Ding¹  Sergio Tadeu Almeida¹ 

[1] School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University, Melbourne, VIC 3083, Australia;

关键词: electric discharge machining EDM;    robotic machining;    wire EDM;    end-effector design;    TRIZ;   

DOI  :  10.3390/machines9070132

来源: DOAJ

【 摘 要 】

Exotic materials such as titanium offer superior characteristics that, paradoxically, make them hard-to-cut by conventional machining. As a solution, electric discharge machining (EDM) stands out as a non-conventional process able to cut complex profiles from hard-to-cut materials, delivering dimensional accuracy and a superior surface. However, EDM is embodied in CNC machines with a reduced axis and machining envelope, which constrains design freedom in terms of size and shape. To overcome these CNC constraints, traditional machining using six-axis industrial robots have become a prominent research field, and some applications have achieved cost efficiency, an improved envelope, and high flexibility. However, due to the lack of stiffness and strength of the robot arm, accuracy, material rate removal, and surface finishing are not comparable to CNC machining. Therefore, the present study investigates the design of a novel WEDM combined with six-axis robotic machining to overcome the limitations of traditional robotic machining and enhance EDM applications. This study extends the work of a conference paper to confirm potential outcomes, quantifying and ranking undesired interactions to map technical problems and applying the TRIZ approach to trigger solutions. Finally, an effective robotic end-effector design is proposed to free EDM from CNC and deliver robotic machining as a flexible and accurate machining system for exotic materials.

【 授权许可】

Unknown