Dimensional accuracy optimization of the micro-plastic injection molding process using the Taguchi design method

Medžiagotyra

Chil-Chyuan KUO KUO¹  Hsin-You LIAO¹ 

[1] Ming Chi University of Technology;

关键词: Fresnel lens, Plastic injection molding, Precision mold, Taguchi design method.;   

DOI  :  10.5755/j01.ms.21.2.5864

来源: DOAJ

【 摘 要 】

Plastic injection molding is an important field in manufacturing industry because there are many plastic products that produced by injection molding. However, the time and cost required for producing a precision mold are the most troublesome problems that limit the application at the development stage of a new product in precision machinery industry. This study presents an approach of manufacturing a hard mold with microfeatures for micro-plastic injection molding. This study also focuses on Taguchi design method for investigating the effect of injection parameters on the dimensional accuracy of Fresnel lens during plastic injection molding. It was found that the dominant factor affecting the microgroove depth of Fresnel lens is packing pressure. The optimum processing parameters are packing pressure of 80 MPa, melt temperature of 240 °C, mold temperature of 90 °C and injection speed of 50 m/s. The dimensional accuracy of Fresnel lens can be controlled within ±3 µm using the optimum level of process parameters through the confirmation test. The research results of this study have industrial application values because electro-optical industries are able to significantly reduce a new optical element development cycle time.

DOI: http://dx.doi.org/10.5755/j01.ms.21.2.5864

【 授权许可】

Unknown