Selective Anisotropy of Mechanical Properties in Inconel718 Alloy

Materials

Yu Liang¹  Wei Li¹  Baogang Zhou¹  Jun Ma¹ 

[1] College of Materials and Metallurgy, Guizhou University, Guiyang 550025, China;

关键词: Inconel718 alloy;    mechanical properties;    anisotropy;    delta phase;   

DOI  :  10.3390/ma14143869

来源: DOAJ

【 摘 要 】

Mechanical anisotropy behaviors are investigated in slightly rolled Inconel718 alloy with string-like δ phase and carbides produced during various solid-solution and aging treatments. A weak anisotropy in the strengths and rupture properties at 650 °C is visible, whereas ductility, i.e., reduction in area (RA) and impact toughness (CVN), presents a sound anisotropy behavior. MC carbides promote the operation of slip systems and thus are conducive to weakening the strength anisotropy. The RA anisotropy mainly stems from high-density δ phase particles that provide more crack nucleation sites and stimulate rapid propagation because of the shorter bridge distance between micro-cracks at the rolling direction. In contrast, CVN anisotropy arises from both δ phase and carbides at a lower solid-solution temperature of 940 °C but only depends on carbides at 980 °C where the δ phase fully dissolves. Apart from dislocation motions operated at room temperature, the activated grain boundary processes are responsible for the weak anisotropy of rupture properties at the elevated temperature. This work provides a guideline for technological applications in the hot working processes for Inconel718 alloys.

【 授权许可】

Unknown