Oligomerization of Ethylene to Produce Linear α-Olefins Using Heterogeneous Catalyst Prepared by Immobilization of α-Diiminenickel(II) Complex into Fluorotetrasilicic Mica Interlayer

Catalysts

关键词: polymerization;    polyethylene;    clay minerals;    intercalation;   

DOI  :  10.3390/catal3010125

来源: DOAJ

【 摘 要 】

Heterogeneous catalysts for production of linear α-olefins from ethylene were prepared by the direct reaction of the α-diimine ligand [L: R-N=C(R')-C(R')=N-R; R' = Me and R = 2,6-Me2Ph (L5), 2,5-Me2Ph (L1), 2-MePh (L2), or Ph (L3); R' = 1,8-naphth-diyl and R = Ph (L4)] and Ni2+ ion-exchanged fluorotetrasilicic mica. Only high molecular weight polyethylene was obtained in the reaction using the L5/Ni2+-Mica procatalyst activated by AlEt3 (TEA) as an activator, whereas the TEA-activated L1- and L2/Ni2+-Mica procatalysts afforded a mixture of a large amount of low-molecular weight polyethylene and a small amount of oligomers having 4-22 carbons. The procatalyst consisting of Ni2+-Mica and the L3 ligand that possesses non-substituted phenyl groups on the iminonitrogen atoms effectively promoted the oligomerization of ethylene after its activation with TEA, resulting in the fact that the ethylene oligomers were produced with a moderate catalytic activity (101 g-ethylene g-cat−1 h−1 at 0.7 MPa-ethylene) in the presence of TEA. When the backbone was varied from the butane moiety (L3) to acenaphthene (L4), the solid product dramatically increased. The weight percentage of the oligomers in the total products increased with the increasing reaction temperature; however, an insignificant increase in the oligomers was observed when the ethylene pressure was decreased.

【 授权许可】

Unknown