Numerical simulation of dissimilar weld joint in SYSWELD simulation software

Tehnički Vjesnik

Radoslav Koňár¹  Marek Patek¹ 

[1] University of Žilina, Faculty of Mechanical Engineering, Department of Technological Engineering, Univerzitná 1, 010 26 Žilina, Slovakia;

关键词: dissimilar weld;    hardness prediction;    residual stress;    SYSWELD;    temperature field;   

DOI  :  

来源: DOAJ

【 摘 要 】

Dissimilar weld joints are prone to frequent failures caused by many factors. Several methods might be used for prediction of the failures, from which prediction of the residual stresses and weld joint hardness plays a very important role. During the construction design, there is a possibility to predict residual stress by welding numerical simulation that may serve as the failure prevention. In presented article, residual stresses of dissimilar X5CrNi18-10/S355J2H weld joint were predicted by SYSWELD software after optimization of welding process by experimentally obtained thermal behaviour. The hardness wizard tool of the programme was employed for prediction of the weld joint hardness.

【 授权许可】

Unknown