Integrating Non-Destructive Testing, Laser Scanning, and Numerical Modeling for Damage Assessment: The Room of the Elements

Heritage

Rebecca Napolitano¹  Branko Glisic¹  Michael Hess² 

[1] Department of Civil and Environmental Engineering, Princeton University, Princeton, NJ 08540, USA;Department of Structural Engineering, University of California San Diego, San Diego, CA 92161, USA;

关键词: historic structure;    documentation;    laser scanning;    non-destructive testing;    thermal imaging;    structural analysis;    finite distinct element modeling;   

DOI  :  10.3390/heritage2010012

来源: DOAJ

【 摘 要 】

For preservation efforts and stability assessment of historic structures it is imperative to understand the extent of existing damages and possible modes for how they could have occurred. The aim of this work is to illustrate the importance of integrating documentation, non-destructive testing, and numerical modeling for damage assessment of heritage structures. In particular, this work explores the synthesis of these techniques on a plastered masonry wall in Palazzo Vecchio. Laser scanning was used to capture the geometry of the wall while terrestrial photogrammetry and high-resolution images were used to document the magnitude of cracking in the plaster layer. High resolution thermal images were used to document the distribution of stones and additional cracks not visible through the plaster layer. The results of documentation and non-destructive testing were used to generate an as-built model for structural analysis. Finite distinct element modeling was used to simulate the response of the wall to a series of loading conditions. By comparing the results of simulation to existing crack patterns, theories for how the damage occurred were generated.

【 授权许可】

Unknown