Crushed and River-Origin Sands Used as Aggregates in Repair Mortars

Geosciences

Maria Stefanidou¹ 

[1] Laboratory of Building Materials, Civil Engineering Department, Aristotle University of Thessaloniki (AUTH), Thessaloniki 54124, Greece;

关键词: river sand;    crushed sand;    lime mortars;    microstructure;    strength;   

DOI  :  10.3390/geosciences6020023

来源: DOAJ

【 摘 要 】

The systematic analysis of mortars from monuments or historic buildings and the simultaneous study of the construction environment show that it was common practice to use naturally occurring sand from local rivers or streams for the production of the mortars. There are cases though, mainly on islands, where sands of natural origin were limited, and marine or crushed sands were used possibly after elaboration. In all cases the particle size analysis of old mortar confirms the presence of even distribution of the granules. As regards the design of the repair mortars, there are criteria that should be taken into consideration in order to produce materials with compatible properties. The main properties concerning sands are the grain distribution and maximum size, the color, the content of fines, and soluble salts. The objective of this research is the study of the physical characteristics of the sands such as the sand equivalent, the gradation, the apparent density, the morphology of the grains, their mineralogical composition and the influence of these properties on the behavior of lime mortars, notably the mechanical and physical properties acquired.

【 授权许可】

Unknown