Life Cycle Assessment of Sustainable Asphalt Pavement Solutions Involving Recycled Aggregates and Polymers

Materials

Cristina Oreto¹  Nunzio Viscione¹  Salvatore Antonio Biancardo¹  Rosa Veropalumbo¹  Francesca Russo¹  Gianluca Dell’Acqua¹ 

[1] Department of Civil, Construction and Environmental Engineering, University of Naples Federico II, Via Claudio 21, 80125 Naples, Italy;

关键词: asphalt mixtures;    waste recycling;    life cycle inventory;    life cycle impact assessment;    cold in-place recycling;    pavement design;   

DOI  :  10.3390/ma14143867

来源: DOAJ

【 摘 要 】

The pursuit of sustainability in the field of road asphalt pavements calls for effective decision-making strategies, referring to both the technical and environmental sustainability of the solutions. This study aims to compare the life cycle impacts of several pavement solution alternatives involving, in the binder and base layers, some eco-designed, hot- and cold-produced asphalt mixtures made up of recycled aggregates in substitution for natural filler and commercial recycled polymer pellets for dry mixture modification. The first step focused on the technical and environmental compatibility assessment of the construction and demolition waste (CDW), jet grouting waste (JGW), fly ash (FA), and reclaimed asphalt pavement (RAP). Then, three non-traditional mixtures were designed for the binder layer and three for the base layer and characterized in terms of the stiffness modulus. Asphalt pavement design allowed for the definition of the functional units of Life Cycle Assessment (LCA), which was applied to all of the pavement configurations under analysis in a “from cradle to grave” approach. The LCA results showed that the best performance was reached for the solutions involving a cold, in-place recycled mixture made up of RAP and JGW in the base layer, which lowered all the impact category indicators by 31% on average compared to those of the traditional pavement solution. Further considerations highlighted that the combination of a cold base layer with a hot asphalt mixture made up of CDW or FA in the binder layer also maximized the service life of the pavement solution, providing the best synergistic effect.

【 授权许可】

Unknown