Carbon Nanotubes Use for the Semiconductors ZnSe and ZnS Material Surface Modification via the Laser-Oriented Deposition Technique

C

Natalia Kamanina¹  Andrey Toikka¹  Bulat Valeev²  Dmitry Kvashnin² 

[1] Lab for Photophysics of Media with Nanoobjects at Vavilov State Optical Institute, Kadetskaya Liniya V.O., Dom 5, Korp.2/Babushkina Str., Dom 36, Korp.1, 199053 St. Petersburg, Russia;Moscow Institute of Physics and Technology (National Research University), 9 Institutskiy per., Dolgoprudny, 141701 Moscow, Russia;

关键词: ZnSe;    ZnS;    surface;    carbon nanotubes;    laser-oriented deposition;    spectra;   

DOI  :  10.3390/c7040084

来源: DOAJ

【 摘 要 】

It is known that a material’s volume and the surface structuring by the nanoparticles causes a significant change in the material’s basic properties. In this aspect, the structuration of the surface of semiconductors is of interest, because their wide potential application in optoelectronics can extend the products’ transparency, hardness, wettability, and other important parameters. This paper presents possible methods for the surface modification of zinc selenide and zinc sulfide when carbon nanotubes are deposited on the surface by the application of the laser-oriented technique. It also shows changes of the spectral, mechanical, and wetting characteristics of the considered materials. Using the molecular dynamic simulations, the possible process of the carbon nanotubes penetration into the considered surfaces is presented. The simulation results are partially supported by the obtained experimental data.

【 授权许可】

Unknown