Modern materials and technologies in the production of artificial casting

Litʹë i Metallurgiâ

K. V. Martynov¹  V. O. Yemelyanov¹  S. S. Tkachenko¹ 

[1] Creative Workshop “Liteyny Dvor” – Branch of the Russian Academy of Arts;

关键词: artistic casting;    investment casting (lvm);    ethyl silicate;    ceramic mold;    strength;   

DOI  :  10.21122/1683-6065-2021-3-78-81

来源: DOAJ

【 摘 要 】

The publication highlights the production of artistic castings by investment casting using combined ceramic molds. The features of the application of a refractory coating, duplex curing of ceramic shells, cutting of molds, removal of the model composition, annealing of ceramic molds, pouring and separation of the gating‑feeding system under conditions of mass production are considered. Hydrolyzed ethyl silicate (ETS) and aqueous alkaline silica sol are used as a binder. The hydrolysis is carried out with an acidic catalyst. The strength of forms on an aqueous binder before calcination (bending strength σi) is from 1.5 to 2 MPa. The presented technology allows flexible coverage of the entire range of art products. Castings weighing from 5 to 10 kg can be produced in one batch, which significantly reduces the production cycle.

【 授权许可】

Unknown