Modeling and Control of a Mini Hybrid Hydro Matrix / Wind in Micro Grid Applications

IEEE Access

Medhat E. M. Ali¹  Ahmed M. Kassem¹  Hesham F. A. Hamed² 

[1] Department of Electrical Engineering, Faculty of Engineering, Sohag University, Sohag, Egypt;Electrical Engineering Department,, Faculty of Engineering, El-Minia University, Minya, Egypt;

关键词: DC link;    hydro matrix;    SEIG;    water wheel;    wind turbine;   

DOI  :  10.1109/ACCESS.2020.3022753

来源: DOAJ

【 摘 要 】

The performance of controlled hybrid renewable hydro matrix wheels/ wind in micro grid application during the variations of water speed and load is described and investigated. This hybrid contained three wheels and three wind turbines modeled in MATLAB Simulink. This presented hybrid model consists of a water wheel and a generator in the main channel, wind turbine drives an induction generator, battery, variable static load, DC link, and control unit. Appropriate controllers are used to maintain the DC-link voltage constant at its desired value with variations of load, water and wind speed. The obtained simulated result shows that the studied hybrid system with the proposed controller and the storage system have a better performance of load voltage and current waveform compared with the case of not using an energy storage unit and the case of without a controller under the water, wind speed and load variations.

【 授权许可】

Unknown