Improvement of corn stover fuel properties via hydrothermal carbonization combined with surfactant

Biotechnology for Biofuels

Zhiwen Jia¹  Xiwei Xu¹  Ren Tu¹  Jiamin Wang¹  Shuchao Cheng¹  Yujian Wu¹  Enchen Jiang¹  Xudong Fan¹  Yan Sun¹ 

[1] College of Materials and Energy in South China Agricultural University;

关键词: Combustion;    Fuel properties;    Hydrothermal carbonization;    Kinetic analysis;    Pelletization;    Solid product;   

DOI  :  10.1186/s13068-019-1581-x

来源: DOAJ

【 摘 要 】

Abstract Background Biomass fuel has been used to supply heat or crude materials in industry to replace the traditional fossil fuel which was one of the chief causes of climate warming. However, the large-scale utilization of biomass fuel was restricted due to the low density and high hydrophilicity of biomass, which causes the problem of transportation and storage. Therefore, pelletization of biomass was used to improve its fuel density. At present, the biomass pellet was widely used to supply heat, gas or electricity generation via gasification, which supplied clean and sustainable energy for industry. However, the energy consumption during pelletization and high hydrophilicity of pellets were still the problem for the large-scale application of biomass pellet. In this study, hydrothermal carbonization and surfactant played the role of permeation, adsorption and wetting in the solution, which was expected to improve the fuel properties and pelletization effectivity of corn stover. Results In the article, surfactant (PEG400, Span80, SDBS) was chosen to be combined with wet torrefaction to overcome the drawbacks and improve the pelletization and combustion properties of Corn stover (CS). Especially, hydrothermal carbonization (HTC) combined with surfactant improves the yield of solid products and reduces the ash content of solid product, which was beneficial for reducing the ashes of furnace during gasification. Meanwhile, surfactant promotes the formation of pseudo-lignin and the absorption for oil with low O and high C during HTC, which improves the energy density of solid product. Furthermore, the oil in solid product plays the role of lubricant and binder, which reduces the negative effect of high energy consumption, low bulk density and weak pellets strength caused by HTC during pelletization. HTC combined with surfactant improved the hydrophobicity of pellet as well as grindability due to the modification of solid product. Moreover, surfactant combined with HTC improved the combustion characteristic of solid product such as ignition and burning temperature as well as kinetic parameters due to the bio-oil absorbed and the improvement of surface and porosity. Conclusions The study supplied a new, less-energy intensive and effective method to improve the pelletization and combustion properties of corn stover via hydrothermal carbonization combined with surfactant, and provided a promising alternative fuel from corn stover .

【 授权许可】

Unknown