Effect of elevated temperature on interfacial shear transfer capacity of self-compacting concrete

Case Studies in Construction Materials

Éva Lublóy¹  N. Anand²  Mervin Ealiyas Mathews²  Tattukolla Kiran³ 

[1]Corresponding authors.

[2]Department of Civil Engineering, Karunya Institute of Technology and Sciences, Coimbatore, India

[3]Department of Construction Materials and Technologies, Faculty of Civil Engineering, Budapest University of Technology and Economics, Budapest, 1521, Hungary

关键词: Self-compacting concrete;    Elevated temperature;    Shear strength;    Shear stress;    Slip;   

DOI  :  

来源: DOAJ

【 摘 要 】

Interfacial shear stress transfer may occur in structural elements across concrete or between concrete and steel. The fundamental contributing parameters which improve the shear capacities are aggregate grading, compressive strength of concrete, type and area of the interfacial zone, and interfacial reinforcement pattern. During the event of a fire, these parameters are severely affected and mainly depend on the exposure level of the temperature and its duration. In the present investigation, the effect of elevated temperature on the interfacial Shear Transfer Capacity (STC) of Self-Compacting Concrete (SCC) was evaluated using shear (push-off) specimens. SCC was developed using Fly Ash (FA) and Ground Granulated Blast Furnace Slag (GGBFS) as Supplementary Cementitious Material (SCM). The study emphasises the proper understanding of degradation in shear strength of SCC exposed to elevated temperatures. Expanded Perlite Aggregate (EPA) is utilised as a partial replacement for fine aggregate. Also, a thermal protective coating is developed with Cement Perlite Plaster (CPP) for improving the performance of SCC. The European Federation of National Associations Representing for Concrete (EFNARC) guidelines were followed to ensure the workability of the developed SCC mix. Specimens were exposed to 30, 60, 90, and 120 min of heating durations following the International Organization for Standardization 834 (ISO 834) fire rating curve and tested to examine residual compressive strength, mass loss, STC after the natural air cooling process. The SCC specimens with EPA content have exhibited higher residual compressive strength and STC. All the protected SCC specimens coated with the CPP mixture contributed to retaining the original shear capacity by resisting the temperature. An empirical relationship was proposed to predict the residual STC of SCC after exposure to elevated temperature.

【 授权许可】

Unknown