RESERVOIR INFLOW SIMULATION USING MIKE NAM RAINFALL-RUNOFF MODEL: CASE STUDY OF CAMERON HIGHLANDS

Journal of Engineering Science and Technology

KWANSUE JUNG¹  AZWIN Z. ABDUL RAZAD²  HIDAYAH BASRI³  LARIYAH M. SIDEK³ 

[1] International Water Resources Research Institute, Chungnam National University, Daejon, Republic of Korea;Researcher, TNB Research Sdn Bhd, No 1, Lorong Air Hitam, Kawasan Institusi Penyelidikan Bangi, 43000 Kajang, Selangor, Malaysia;Sustainable Technology and Environment Group, Institute of Energy Infrastructure, Universiti Tenaga Nasional, 43000 Kajang, Selangor, Malaysia;

关键词: Calibration;    MIKE NAM;    NSE;    Rainfall-runoff modelling;    Reservoir;    Statistical;    Sensitivity analyses;   

DOI  :  

来源: DOAJ

【 摘 要 】

Ringlet Reservoir in Cameron Highlands impounds water mainly from four main rivers namely Sg. Telom, Sg. Habu, Sg. Ringlet and Sg. Bertam. Due to the absence of gauge flow data, MIKE NAM rainfall runoff model was used to simulate inflow for short term and long term prediction. Peak flow is sensitive towards any changes in Umax, TG, CQOF, CKBF, CKIF and CK1,2. All parameters except CK1,2 are sensitive in calculation of total volume. Model was calibrated for the period from 1999 to 2006 and validated for the period from 2010 to 2012 at two streamflow locations. The model is reliable to simulate flow satisfactorily especially during flood events. Model shows good agreement between the simulated and observed flow in terms of low flow, peak flow and total volume. Good calibration results were achieved for all scenarios, with NSE > 0.66, RSR < 0.6, R2 > 0.74 and PBIAS (%) < 15%.

【 授权许可】

Unknown