Effect of Transient Thermal Conditions on Columnar-to-Equiaxed Transition during Laser Welding: A Phase-Field Study

Metals

Annan Yin¹  Chu Han¹  Liangyuan Ren¹  Wen Yang¹  Lingyu Guo¹ 

[1] The State Key Laboratory of Digital Manufacturing Equipment and Technology, School of Mechanical Science and Engineering, Huazhong University of Science & Technology, Wuhan 430074, China;

关键词: columnar-to-equiaxed transition;    laser welding;    transient thermal condition;    phase-field model;   

DOI  :  10.3390/met12040571

来源: DOAJ

【 摘 要 】

The columnar-to-equiaxed transition (CET) is commonly observed in laser welds. It is able to prevent the growth of large columnar grains and consequently improve the mechanical properties of welded joints. In this paper, the CET behaviors at different locations in the laser weld of an Al–Mg alloy are observed experimentally and studied systematically. In order to describe the dynamic CET behaviors, an integrated phase-field (PF) model coupled with transient thermal conditions and a Gaussian heterogeneous nucleation model is developed. Investigations on columnar growth under steady conditions are performed first. In particular, the effects of thermal conditions, i.e., solidification rate and temperature gradient, on the constitutionally undercooled degree and region ahead of the solidification front are quantitatively studied. In a laser weld, it is found that the CET behaviors vary significantly along the thickness direction. Our PF simulation results indicate that the CET depends strongly on the locally transient thermal conditions in the fusion zone. The transient thermal conditions affect CET behaviors by dynamically adjusting the constitutionally undercooled degree and region during the solidification process. The predicted CET behaviors under transient conditions exhibit reasonably good agreements with corresponding experimental results.

【 授权许可】

Unknown