Interface Direct Shear Tests on JEZ-1 Mars Regolith Simulant

Applied Sciences

Eugenia Di Filippo¹  Kexin Yin¹  Andreea-Roxana Vasilescu¹  Khaoula Othmani¹  Jiangxin Liu²  Jiaxing Lin³ 

[1] Institut de Recherche en Génie Civil et Mécanique (GeM), Ecole Centrale de Nantes, UMR 6183 CNRS, 1 Rue de la Noë, CEDEX 3, 44321 Nantes, France;Research Institute of Highway Ministry of Transport, Beijing 100088, China;Shandong Electrical Power Supply & Transformation Engineering Co., Ltd., No. 1000 Meili Road, Huaiyin District, Jinan 250022, China;

关键词: Mars Jezero Crater Delta simulant (JEZ-1);    compressibility;    direct shear test;    soil-structure interface;    friction angle;   

DOI  :  10.3390/app11157052

来源: DOAJ

【 摘 要 】

The mechanical behaviors of Martian regolith-structure interfaces are of great significance for the design of rover, development of excavation tools, and construction of infrastructure in Mars exploration. This paper presents an experimental investigation on the properties of a Martian regolith simulant (JEZ-1) through one-dimensional oedometer test, direct shear test, and interface direct shear tests between JEZ-1 and steel plates with different roughness. Oedometer result reveals that the compression and swelling indexes of the JEZ-1 are quite low, thus it is a less compressible and lower swelling soil. The cohesion and adhesion of JEZ-1 are lower than 5 kPa. The values of the internal friction angle range from 39.7° to 40.6°, and the interface friction angles are 16.7° to 36.2° for the smooth and rough interface. Furthermore, the direct shear and interface direct shear results indicate that the interface friction angles are lower than the internal friction angles of JEZ-1 and increase close to the internal friction angles with increasing interface roughness.

【 授权许可】

Unknown