Matrix Extraction of Parasitic Parameters and Suppression of Common-Mode Conducted Interference in a PMSG-IDOS Rectifier Module

Electronics

Chunjian Xia¹  Lantian Liu¹  Xudong Wang¹  Jinfeng Liu¹ 

[1] Ministry of Education, Engineering Research Center of Automotive Electronics Drive Control and System Integration, Harbin University of Science and Technology, Harbin 150080, China;

关键词: common-mode interference;    emi filter;    matrix extraction;    pmsg-idos;    parasitic parameters;    jump-backward;   

DOI  :  10.3390/electronics9020206

来源: DOAJ

【 摘 要 】

The rectifier module is the key part of a permanent magnet synchronous generator integrated DC output system (PMSG-IDOS) with low-voltage and high-current. The high-speed switching device of the rectifier module is the main source of electromagnetic interference (EMI). In this paper, the matrix extraction method is proposed to establish an accurate conducted interference model, and a 3D crimped SiC MOSFET model is established via Ansoft Q3D simulation software. The matrix of the parasitic parameters between poles of the MOSFET is simulated to extract the accurate parasitic parameters. Furthermore, a high-precision conducted interference simulation model of the pulse width modulation (PWM) rectifier system is established. Then, the space vector pulse width modulation (SVPWM) jump-backward control strategy based on the three-phase four-leg structure is proposed to suppress the common-mode interference, and the comparison with other two methods is carried out based on this model. Finally, the experimental platform of a 5 V/1000 A synchronous generator with rectifier is constructed, and conducted interference is tested in accordance with the simulated results. It demonstrates the accuracy of the model with parasitic parameters based on the matrix extraction method. This paper provides a more simple and effective reference method for the prediction study of conducted interference in power converter systems. After comparing the simulation results with the experimental results, it is proven that the SVPWM jump-backward control strategy based on the three-phase four-leg structure can ensure the output balance of the bridge leg and allow the common-mode (CM) interference to reach the ideal state.

【 授权许可】

Unknown