Cantor-derived medium-entropy alloys: bridging the gap between traditional metallic and high-entropy alloys

Journal of Materials Research and Technology

Marc André Meyers¹  Robert O. Ritchie²  Fabio Da Costa Garcia Filho³  Sergio Neves Monteiro⁴ 

[1] Corresponding author.;Department of Mechanical and Aerospace Engineering, University of California, San Diego, CA, 92093, United States;Department of Materials Science, Military Institute of Engineering, Rio de Janeiro, RJ, 22290-270, Brazil;Materials Sciences Division, Lawrence Berkeley National Laboratory, and Department of Materials Science and Engineering, University of California, Berkeley, CA, 94720, United States;

关键词: High-entropy alloys;    Medium-entropy alloys;    Mechanical properties;    Microstructure;    Cantor alloy;   

DOI  :  

来源: DOAJ

【 摘 要 】

The year 2004 marked the beginning of a new era in the design of metallic materials, as the concept of multiple principal component alloys, commonly known as High-Entropy Alloys (HEAs), was proposed by Cantor and Yeh. The unexpected single-phase microstructure, instead of the expected brittle intermetallic compounds, was attributed to the large entropy of mixing and immediately caught the attention of the scientific community. Today, HEAs are considered important advanced materials and a broad range of alloys using nominally the same design principle have been investigated. Despite that, the CrMnFeCoNi (Cantor) alloy stands out as the most successful HEA due to its outstanding mechanical properties and microstructure. In this scenario, variants of the Cantor alloy, named medium-entropy alloys (MEAs), are gaining significant interest as they display a better industrial potential than both HEAs and traditional alloys. These variants of the Cantor alloy with only three or four main elements result in 15 possible combinations. The microstructure of these alloys is discussed in terms of advanced characterization as well as thermodynamic parameters and computational simulation. Their phase stability is addressed over a wide range of temperatures and strain rates. The mechanical properties, especially the fracture toughness, of the CrFeCoNi and CrCoNi alloys have been reported to be even superior to those of the Cantor alloy and most modern engineering alloys. This is associated with the formation of a continuous sequence of strengthening mechanisms, including hierarchical twin networks, which serve to prolong the strain hardening. The present article reviews and critically assesses, for the first time, recent advances in these Cantor-derived MEAs.

【 授权许可】

Unknown