A Successive Approximation Time-to-Digital Converter with Single Set of Delay Lines for Time Interval Measurements

Sensors

Dariusz Kościelnik¹  Jakub Szyduczyński¹  Marek Miśkowicz² 

[1] Department of Electronics, AGH University of Science and Technology, 30-059 Kraków, Poland;Department of Measurement and Electronics, AGH University of Science and Technology, 30-059 Kraków, Poland;

关键词: successive approximation;    time-to-digital converter (TDC);    feedforward architecture;    time interval measurement;   

DOI  :  10.3390/s19051109

来源: DOAJ

【 摘 要 】

The paper is focused on design of time-to-digital converters based on successive approximation (SA-TDCs—Successive Approximation TDCs) using binary-scaled delay lines in the feedforward architecture. The aim of the paper is to provide a tutorial on successive approximation TDCs (SA-TDCs) on the one hand, and to make the contribution to optimization of SA-TDC design on the other. The proposed design optimization consists essentially in reduction of circuit complexity and die area, as well as in improving converter performance. The main paper contribution is the concept of reducing SA-TDC complexity by removing one of two sets of delay lines in the feedforward architecture at the price of simple output decoding. For 12 bits of resolution, the complexity reduction is close to 50%. Furthermore, the paper presents the implementation of 8-bit SA-TDC in 180 nm CMOS technology with a quantization step 25 ps obtained by asymmetrical design of pair of inverters and symmetrized multiplexer control.

【 授权许可】

Unknown