Determining the Power Consumption of the Automatic Device for Belt Perforation Based on the Dynamic Model

Energies

Krzysztof Wałęsa¹  Dominik Wojtkowiak¹  Dominik Wilczyński¹  Krzysztof Talaśka¹  Jan Górecki¹ 

[1] Institute of Machine Design, Poznan University of Technology, Piotrowo 3 Street, 61-138 Poznan, Poland;

关键词: dynamic analysis;    timing belt;    catalog mechanical properties;    punching die;    belt perforation;    Lagrangian mechanics;   

DOI  :  10.3390/en14020317

来源: DOAJ

【 摘 要 】

The subject of the dynamic analysis presented in the article is the linear drive system with a timing belt utilized in the automatic device for polymer composite belt perforation. The analysis was carried out in two stages. In the first stage, the timing belt was modeled with all the relevant dynamic phenomena; subsequently, the tension force of the belt required for the correct operation of the belt transmission was determined. The necessary parameters for belt elasticity, vibration damping, and inertia are based exclusively on the catalog data provided by the manufacturer. During the second stage, equations of motion were derived for the designed drive system with a timing belt, and characteristics were identified to facilitate the optimal selection of electromechanical drives for the construction solution under analysis. The presented methodology allows for designing an effective solution that may be adapted for other constructions. The obtained results showed the influence of the kinematic parameters on the motor torque and proved the importance of reducing the mass of the components in machines that perform high-speed processes.

【 授权许可】

Unknown