Feasibility analysis of a combined chemical looping combustion and renewable-energy-based methane production system for CO2 capture and utilization

Thermal Science

Mancusi Erasmo¹  Bareschino Piero¹  Pepe Francesco¹  Urciuolo Massimo²  Coppola Antonio² 

[1] Dipartimento di Ingegneria Università degli Studi del Sannio, Benevento, Italy;Istituto di Ricerche sulla Combustione Consiglio Nazionale delle Ricerche, Napoli, Italy;

关键词: thermal power plants;    chemical looping combustion;    co2 capture and utilization;    methanation;    numerical model;   

DOI  :  10.2298/TSCI200328281B

来源: DOAJ

【 摘 要 】

Power-to-methane represents an innovative approach to convert electrical into chemical energy. Such a technology could actually be successful only when the coupling of a cost-effective source of electrical energy and a pure CO2 stream is carried out. Under this perspective, this paper numerically investigates an inno-vative process layout that integrates a fluidized beds chemical looping system for the combustion of solid fuels and a renewable-based power-to-methane system. Process performances were evaluated by considering a coal and three sewage sludge, differing in water content, as fuels, CuO supported on zirconia as oxygen carrier, hydrogen production via water electrolysis, and Ni supported on alumina as methanation catalyst. Autothermal feasibility of the process was assessed by considering that part of the produced CH4 can eventually be burned to dry high-moisture-content fuels. Finally, by considering that only electric energy from renewable sources is used, the capability of the proposed process to be used as an energy storage system was evaluated.

【 授权许可】

Unknown