FATIGUE LIFE PREDICTION BASED ON MACROSCOPIC PLASTIC ZONE ON FRACTURE SURFACE OF AISI-SAE 1018 STEEL

International Journal of Automotive and Mechanical Engineering

关键词: Rotating bending fatigue;    Metallic alloy;    Non metallic inclusions;    Plastic strain;    Fatigue endurance model.;   

DOI  :  

来源: DOAJ

【 摘 要 】

This paper deals with rotating bending fatigue tests at high speed (150 Hz) carried out on AISI-SAE 1018 steel with a high content of impurities (non metallic inclusions), for which the high experimental stress inside the specimen is close to the elastic limit of the material. Simulations of rotating loading are obtained by Visual NASTRAN software in order to determine the numerical stresse and strain distributions inside a hypothetical homogeneous specimen; later, this information is used for the experimental set up. A general description of experimental test machine and experimental conditions are developed and then, the experimental results are presented and discussed according the observed failure origin related to the non metallic inclusions and the associated high stress zones. Finally, a simple model is proposed to predict the fatigue life for this non homogeneous steel under high speed rotating bending fatigue tests close to the elastic limit, based on the rate between the visual macro-plastic deformation zone at fracture surface and the total fracture surface, together with the crack initiation inclusion (or inclusions) located at this zone.

【 授权许可】

Unknown