Material’s Volumetric-Flow Rate (MVR) as a Unification Parameter in Asphalt Rheology and Quality Control / Quality Assurance Tool for High Temperature Performance Grading

Applied Rheology

Shenoy Aroon¹ 

[1] Federal Highway Administration 6300 Georgetown Pike McLean, VA 22101 U.S.A. Fax:x1.202.493.3161;

关键词: asphalt rheology;    unified curves;    flow measurement device;    material’s volumetric-flow rate;    viscoelastic parameters;    superpave specification parameter;    rutting resistance;    aging;   

DOI  :  10.1515/arh-2000-0019

来源: DOAJ

【 摘 要 】

Rheological data of unmodified and polymer-modified asphalts are conventionally obtained from dynamic mechanical characterization and expressed in terms of sets of curves showing the variation of viscoelastic properties with frequency. Using the conventional melt flow indexer, the material’s volumetric-flow rate MVR (in cm3 / 10 minutes) through a predefined die under conditions of constant temperature and stress when obtained for the same asphalts, shows a direct relationship with the dynamic data. The MVR value helps in unifying the sets of dynamic data curves of |G*|, G” and |G* |/sin δ versus frequency in the case of unmodified asphalts, polymer-modified asphalts and asphalt mastics. The unification technique has a sound theoretical basis and the unified curves have far-reaching implications. Since MVR is so simple to determine quite accurately on a relatively inexpensive, easy-to-use flow measurement device (FMD), this parameter can be generated on paving sites or at refineries, if needed, rather than in research laboratories as is the case with the fundamental rheological parameters. The MVR can then be used as an excellent indicator of the fundamental rheological parameters through the use of the unified curves. The MVR can be utilized to accurately determine the currently used high temperature performance grade specification of paving asphalt. On account of the simplicity in obtaining this specification value from the MVR, it may be routinely used for quality control / quality assurance purposes. It can also be used as a rapid product development / formulation tool.

【 授权许可】

Unknown