Improvement of the Classification Accuracy of Steady-State Visual Evoked Potential-Based Brain-Computer Interfaces by Combining L1-MCCA with SVM

Applied Sciences

Hao Liu¹  Yujin Zhang¹  Weixian Li²  Yuhang Gao²  Jianhu Chen²  Qing He²  Juanning Si²  Sijin Wu² 

[1] Brainnetome Center, Institute of Automation, Chinese Academy of Sciences, Beijing 100190, China;School of Instrumentation Science and Opto-Electronics Engineering, Beijing Information Science and Technology University, Beijing 100192, China;

关键词: steady-state visual evoked potential (SSVEP);    brain-computer interface (BCI);    l1-regularized multiway canonical correlation analysis (L1-MCCA);    support vector machine (SVM);    particle swarm optimization (PSO);   

DOI  :  10.3390/app112311453

来源: DOAJ

【 摘 要 】

Canonical correlation analysis (CCA) has been used for the steady-state visual evoked potential (SSVEP) based brain-computer interface (BCI) for a long time. However, the reference signal of CCA is relatively simple and lacks subject-specific information. Moreover, over-fitting may occur when a short time window (TW) length was used in CCA. In this article, an optimized L1-regularized multiway canonical correlation analysis (L1-MCCA) is combined with a support vector machine (SVM) to overcome the aforementioned shortcomings in CCA. The correlation coefficients obtained by L1-MCCA were transferred into a particle-swarm-optimization (PSO)-optimized support vector machine (SVM) classifier to improve the classification accuracy. The performance of the proposed method was evaluated and compared with the traditional CCA and power spectral density (PSD) methods. The results showed that the accuracy of the L1-MCCA-PSO-SVM was 96.36% and 98.18% respectively when the TW lengths were 2 s and 6 s. This accuracy is higher than that of the traditional CCA and PSD methods.

【 授权许可】

Unknown