The Effect of Wet Compression on a Centrifugal Compressor for a Compressed Air Energy Storage System

Energies

Zhitao Zuo¹  Haisheng Chen¹  Jianting Sun¹  Qi Liang¹  Xin Zhou¹ 

[1] Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100190, China;

关键词: compressed air energy storage;    centrifugal compressor;    wet compression;    numerical simulation;   

DOI  :  10.3390/en12050906

来源: DOAJ

【 摘 要 】

There is an urgent demand to reduce compression power consumption in Compressed Air Energy Storage (CAES) systems. Wet compression has been widely used in gas turbines to reduce compressor power consumption and improve thermal efficiency, but this technology has not been applied yet in the CAES field. In this paper, a centrifugal compressor for CAES was numerically studied to investigate the effect of wet compression on compressor and droplet motion. The results showed that wet compression makes the performance curve shift to a high-pressure ratio/efficiency. Meanwhile, wet compression lowers the stall margin and narrows the stable operation range, and the effect is enhanced with the increase of water injection ratio or the decrease of average droplet diameter. Wet compression can effectively save compressor power consumption during energy storage, and at the designed pressure ratio, the power consumption can be reduced by 1.47% with a water injection ratio of 3% and an average droplet diameter of 5 μm. Influenced by the inertia and secondary flow, the droplets migrate to the impeller pressure and shroud side, thus causing brake loss by impacting on blades. The migration of droplets strengthens with the increase in the average droplet diameter and flow coefficient.

【 授权许可】

Unknown