期刊论文详细信息
Frontiers in Plant Science
Rapeseed Seedling Stand Counting and Seeding Performance Evaluation at Two Early Growth Stages Based on Unmanned Aerial Vehicle Imagery
Chenghai Yang1  Dongyan Zhang2  Qingxi Liao3  Youchun Ding3  Guangsheng Zhou4  Jing Xie6  Yeyin Shi7  Biquan Zhao8  Jian Zhang8 
[1] Aerial Application Technology Research Unit, USDA-Agricultural Research Service, College Station, TX, United States;Anhui Engineering Laboratory of Agro-Ecological Big Data, Anhui University, Hefei, China;College of Engineering, Huazhong Agricultural University, Wuhan, China;College of Plant Science and Technology, Huazhong Agricultural University, Wuhan, China;College of Resource and Environment, Huazhong Agricultural University, Wuhan, China;College of Science, Huazhong Agricultural University, Wuhan, China;Department of Biosystems and Agricultural Engineering, University of Nebraska - Lincoln, Lincoln, NE, United States;Key Laboratory of Arable Land Conservation (Middle and Lower Reaches of Yangtze River), Ministry of Agriculture, Wuhan, China;
关键词: UAV;    remote sensing;    vegetation index;    rapeseed seedling;    stand count;    high-throughput phenotyping;   
DOI  :  10.3389/fpls.2018.01362
来源: DOAJ
【 摘 要 】

The development of unmanned aerial vehicles (UAVs) and image processing algorithms for field-based phenotyping offers a non-invasive and effective technology to obtain plant growth traits such as canopy cover and plant height in fields. Crop seedling stand count in early growth stages is important not only for determining plant emergence, but also for planning other related agronomic practices. The main objective of this research was to develop practical and rapid remote sensing methods for early growth stage stand counting to evaluate mechanically seeded rapeseed (Brassica napus L.) seedlings. Rapeseed was seeded in a field by three different seeding devices. A digital single-lens reflex camera was installed on an UAV platform to capture ultrahigh resolution RGB images at two growth stages when most rapeseed plants had at least two leaves. Rapeseed plant objects were segmented from images of vegetation indices using typical Otsu thresholding method. After segmentation, shape features such as area, length-width ratio and elliptic fit were extracted from the segmented rapeseed plant objects to establish regression models of seedling stand count. Three row characteristics (the coefficient of variation of row spacing uniformity, the error rate of the row spacing and the coefficient of variation of seedling uniformity) were further calculated for seeding performance evaluation after crop row detection. Results demonstrated that shape features had strong correlations with ground-measured seedling stand count. The regression models achieved R-squared values of 0.845 and 0.867, respectively, for the two growth stages. The mean absolute errors of total stand count were 9.79 and 5.11% for the two respective stages. A single model over these two stages had an R-squared value of 0.846, and the total number of rapeseed plants was also accurately estimated with an average relative error of 6.83%. Moreover, the calculated row characteristics were demonstrated to be useful in recognizing areas of failed germination possibly resulted from skipped or ineffective planting. In summary, this study developed practical UAV-based remote sensing methods and demonstrated the feasibility of using the methods for rapeseed seedling stand counting and mechanical seeding performance evaluation at early growth stages.

【 授权许可】

Unknown   

  文献评价指标  
  下载次数:0次 浏览次数:0次