期刊论文详细信息
تحقیقات علوم چوب و کاغذ ایران | |
The Effect of Micro-Cellulose Length on Mechanical, Thermal and Morphological Properties in Nano/Wood Plastics Composites | |
Amir Norbakhsh1  Abolfazl Kargarfard2  | |
[1]Associate.Prof., Wood Science and its Products Research Division, Iran Research Institute of Forests and Rangelands, Tehran, Iran | |
[2]Associate.Prof., Wood Science and its Products Research Division, Iran ResearchInstitute of Forests and Rangelands, Tehran, Iran | |
关键词: Composite; MECHANICAL PROPERTIES; Micro- cellulose; Thermal properties; Nanoclay; | |
DOI : 10.22092/ijwpr.2015.102673 | |
来源: DOAJ |
【 摘 要 】
In this research the impact of micro cellulose particles length, and coupling agent (MAPP) on the mechanical and thermal properties of Nano/ wood plastics composites were investigated. The results showed that mechanical properties of the composites made with 50 micron micro cellulose particles and 5 % of MAPP were significantly different to those of the lower length (20 micron) and 2.5% of MAPP. Addition of MAPP enhanced the mechanical and thermal properties of the blends, due to the improvement of interface bond between the filler and matrix of Nano/ wood plastics composites. The significant improvements in mechanical properties of the blended composites made with MAPP and NC were further supported by SEM and TEM micrographs. Nano/ clay particles distribution and thermo gravimetric analysis (TGA) indicated that the addition of 5% MAPP and the longer micro cellulose particles remarkably increased the thermal stability of the blends compared to other treatments of Nano/ wood plastics composites.【 授权许可】
Unknown