A New Approach to Decoupled Non-Resonant Polishing

Micromachines

Rongqi Wang¹  Yucheng Li¹  Xiaoqin Zhou¹  Peiqun Ma²  Guilian Wang³ 

[1] School of Mechanical and Aerospace Engineering, Jilin University, Changchun 130022, China;Shanghai Automotive Industry Corporation (Group) Motor Technical Center, Shanghai 201804, China;Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control, Tianjin University of Technology, Tianjin 300384, China;

关键词: two-dimensional vibration-assisted polishing (2D-VAP);    decoupled;    removal function;   

DOI  :  10.3390/mi10070484

来源: DOAJ

【 摘 要 】

Two-dimensional vibration-assisted polishing (2D-VAP) is a new polishing approach proposed in recent years, which is considered to be very suitable for the polishing of micro-optical parts and micro-structured surfaces. The advantages of the 2D-VAP approach are as follows: A very high relative velocity can be obtained between the workpiece and the polishing tool; the desired motion trajectory can be formed in one polishing cycle. However, there are still some problems to be solved in the 2D-VAP approach, mainly involving: The vibration frequency of the resonant excitation cannot be regulated, which makes it difficult to adapt to the processing demands of different materials; the theoretical model of removal function has been studied in few papers; and motion coupling occurs easily between the horizontal and vertical directions, which affects the trajectory synthesized at the polishing tool. In order to solve these problems, a new approach to decoupled non-resonant polishing is developed in this paper, and its effectiveness is investigated by the theoretical analysis and polishing experiments. Theoretical studies of removal function show that the vibration frequency, vibration amplitude and loading force are proportional to the removal depth. The comparison of experimental and modeling results of removal function show that they have good coherence, and the correctness of the theoretical model of removal function is verified. In addition, the stability experiments of removal function prove that the polishing approach has better stability and is beneficial to the convergence of workpiece surface.

【 授权许可】

Unknown