Photoluminescence and electrochemical performances of Eu3+doped La10Si6O27 nanophosphor: Display and electrochemical sensor applications

Applied Surface Science Advances

K.M. Girish¹  N. Basavaraju¹  D.M. Jnaneshwara²  Ramachandra Naik³  S. Ashwini⁴  M.R. Anil Kumar⁵  A. Naveen Kumar⁵  C.R. Ravikumar⁶  H.C. Ananda Murthy⁶  H. Nagabhushana⁶ 

[1] Corresponding authors.;Research Center, Department of Science, East West Institute of Technology, VTU, Bengaluru 560091, India;CNR Rao Centre for Advanced Materials, Tumkur University, Tumkur 572103, Karnataka, India;Department of Applied Chemistry, School of Applied Natural Sciences, Adama Science and Technology University, P.O. Box: 1888, Adama, Ethiopia;Department of Physics, SJB Institute of Technology, VTU, Bengaluru 560060, India;Research Center, Department of Science, East West Institute of Technology, VTU, Bengaluru 560091, India;

关键词: Eu3+ doped La10Si6O27;    Solution combustion;    Photoluminescence;    CIE;    Sensor;   

DOI  :  

来源: DOAJ

【 摘 要 】

The current work involves the synthesis of a series of Eu3+ (1–11 mol%) doped La10Si6O27 nanophosphors (ELNPs) by solution combustion method using oxalyl dihydrozil (ODH) as a fuel for the first time. The PXRD studies revealed the average crystallite size in the range 15–35 nm for ELNPs. DRS studies revealed the energy gap of Eu3+ (1–11 mol %) doped La10Si6O27 is ~5.4 eV. The Photoluminescence (PL) studies of the ELNPs showed all the characteristic emission of Eu3+ cations and optimal emission intensity was observed for 5 mol % concentration of Eu3+ ions. The excitation maxima detected at 360 nm, 379 nm, 391 nm, 400 nm, 413 nm and 462 nm were conformed to transitions from 7F0→5G3, 5G4, 5L6, 5D4, 5D3 and 5D2 states of Eu3+ ions respectively. The observed intensities of PL transitions clearly indicated great potentiality for the fabrication of blue/near UV-LED excited phosphor for WLEDs. The calculated CIE chromaticity coordinates confirm the red emission and were depicted in the CIE diagram. The paracetamol and penegra materials were effectively sensed by the prepared carbon paste electrode of Eu3+ (3 mol %) doped La10Si6O27 as revealed by cyclic voltammetric and EIS studies. All the above results show that the synthesized ELNPs can be a potential candidate for display and electrochemical sensor applications.

【 授权许可】

Unknown