Power Factor Estimation of Distributed Energy Resources Using Voltage Magnitude Measurements

Journal of Modern Power Systems and Clean Energy

Matthew J. Reno¹  Samuel Talkington²  Santiago Grijalva² 

[1] Sandia National Laboratories,Electric Power Systems Research Department,Albuquerque,NM,USA,87123;School of Electrical and Computer Engineering, Georgia Institute of Technology,Atlanta,GA,USA,30318;

关键词: Decentralized power system control;    detection and estimation;    power factor;    sparse approximation;   

DOI  :  10.35833/MPCE.2021.000086

来源: DOAJ

【 摘 要 】

This paper presents a new method for the estimation of the injection state and power factor of distributed energy resources (DERs) using voltage magnitude measurements only. A physics-based linear model is used to develop estimation heuristics for net injections of real and reactive power at a set of buses under study, allowing a distribution engineer to form a robust estimate for the operating state and the power factor of the DER at those buses. The method demonstrates and exploits a mathematical distinction between the voltage sensitivity signatures of real and reactive power injections for a fixed power system model. Case studies on various test feeders for a model of the distribution circuit and statistical analyses are presented to demonstrate the validity of the estimation method. The results of this paper can be used to improve the limited information about inverter parameters and operating state during renewable planning, which helps mitigate the uncertainty inherent in their integration.

【 授权许可】

Unknown