Effect of growth time and annealing on the structural defect concentration of hydrothermally grown ZnO nanowires

AIMS Materials Science

Dapeng Yu¹  Fang Lin¹  Clotaire Chevalier-César²  Martine Capochichi-Gnambodoe²  Yamin Leprince-Wang² 

[1] State Key Laboratory for Mesoscopic Physics, Department of Physics, Peking University, Beijing 100871, Chin;Université Paris-Est, ESYCOM, UPEM, 5 bd Descartes, F-77454 Marne-la-Vallée, Franc;

关键词: ZnO nanowires;    hydrothermal method;    structural defects;    photoluminescence;   

DOI  :  10.3934/matersci.2016.2.562

来源: DOAJ

【 摘 要 】

As a low temperature and low cost synthesis method, the hydrothermal deposition is widely used to grow ZnO nanowire arrays. Their optical properties are closely related to concentration of the structural defects in the ZnO nanowires. In this work we report on investigation on the evolution of the structural defects of ZnO nanowire arrays for different growth time, before and after post-annealing. The photo-emission properties of the ZnO nanowire arrays have been investigated in detail by using photoluminescence (PL) spectroscopy both on the as-grown nanowires and on the annealed ones. The PL analysis results showed an increasing intensity in the visible emission band with the growth time which is closely related to the change of the concentration of the structural defects in the ZnO nanowires regarding to the UV near-edge emission. The visible PL emission band can be deconvoluted into three Gaussians components, which correspond to the green, yellow-orange and red emissions, respectively. It is further revealed that the intensity of the orange and red emission bands increase with the increase of the growth time, which are ascribed to the interstitial oxygen and/or hydroxide groups and adsorbed oxygen, respectively. The correlation between energy-dispersive X-ray spectroscopy (EDS) analysis and PL measurements revealed that the excess zinc can be formed in the nanowires during the hydrothermal process.

【 授权许可】

Unknown