Integrated Design of Structure and Material of Epoxy Asphalt Mixture Used in Steel Bridge Deck Pavement

Buildings

Yangguang Sun¹  Wei Xu²  Wen Nie²  Duanyi Wang²  Xiaoquan Xiao³ 

[1] Guangdong Communication Planning & Design Institute Group Co., Ltd., 22 Xinghua Road, Tianhe District, Guangzhou 510507, China;School of Civil Engineering and Transportation, South China University of Technology, 381 Wushan Road, Tianhe District, Guangzhou 510641, China;Xiaoning Institute of Roadway Engineering, Wushan Road, Tianhe District, Guangzhou 510641, China;

关键词: epoxy asphalt mixture;    steel bridge deck;    structure and material;    fatigue durability performance;    bonding performance;    anti-skid performance;   

DOI  :  10.3390/buildings12010009

来源: DOAJ

【 摘 要 】

To comprehensively investigate the integrated structural and material design of the epoxy asphalt mixture used in steel bridge deck pavement, the following works have been conducted: 1. The strain level of steel bridge deck pavement was calculated; 2. The ultimate strain level of fatigue endurance for epoxy asphalt concrete was measured; 3. The effect of water tightness of epoxy asphalt mixture on the bonding performance of steel plate interface was tested. 4. For better performance evaluation, quantitative analysis of the anti-skid performance of epoxy asphalt mixture was carried out by testing the structure depth using a laser texture tester. Results show the following findings: 1. The fatigue endurance limit strain level of epoxy asphalt mixture (600 με) was higher than that of the steel bridge deck pavement (<300 με), indicating that the use of epoxy asphalt concrete has better flexibility and can achieve a longer service life in theory; 2. The epoxy asphalt concrete has significant water tightness to protect the steel plate interface from corrosion and ensure good bonding performance; 3. The porosity of epoxy asphalt mixture used in steel bridge deck paving should be controlled within 3%; 4. In terms of anti-skid performance of bridge deck pavement, the FAC-10 graded epoxy asphalt mixture is recommended when compared with EA-10C.

【 授权许可】

Unknown