Using Chain Extenders to Modify Release Rates of Orange Oil from Poly(Urea-Urethane) Microcapsules

Acta Chimica Slovenica

Jurij Pušlar¹  Aljoša Vrhunec²  Dejan Štefanec² 

[1] Belinka Perkemija d.o.o., Zasavska cesta 95, 1231 Ljubljana-Črnuče;MikroCaps d.o.o., Stražarjeva 14, 1000 Ljubljana;

关键词: Microencapsulation;    Interfacial polycondensation;    Orange oil;    Release behaviour;   

DOI  :  10.17344/acsi.2015.1434

来源: DOAJ

【 摘 要 】

Poly(urea-urethane) and polyurea microcapsules were prepared by an interfacial polymerisation using orange oil as a core material and a mixture of polymeric 4,4-methylenediphenyldiisocyanate and toluene diisocyanate in a molar ratio of 1:0.2 as oil-soluble monomers. The membrane composition, its thickness and other properties were varied by changing the type and amount of oil-soluble monomers and water-soluble chain extenders, such as ethylenediamine and diethylenetriamine based on amine groups and 1,4-butanediol and polyethylene glycol 400 based on hydroxyl groups. Studies of the morphology and release behaviour of microcapsules show high dependency on the reaction conditions and reactants’ properties. The release rate of the orange oil from microcapsules is highest when using a polymeric linear chain extender, polyethylene glycol with a molecular mass of 400. Improved mechanical stability and a slower release rate of microcapsules were achieved by a thicker membrane and by using the branched multi-functional chain extender diethylenetriamine.

【 授权许可】

Unknown