Oblique/Curved Tube Necking Formed by Synchronous Multipass Spinning

Metals

Hirohiko Arai¹  Shiori Gondo¹ 

[1] Advanced Manufacturing Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8564, Japan;

关键词: metal spinning;    tube forming;    incremental forming;    numerical control;   

DOI  :  10.3390/met10060733

来源: DOAJ

【 摘 要 】

In this paper, we propose a method of forming a tube into an oblique/curved shape by synchronous multipass spinning, in which the forming roller reciprocates in the radial direction in synchrony with the rotation angle of the spindle while the roller moves back and forth along the workpiece in the axial direction to gradually deform a blank tube into a target shape. The target oblique/curved shape is expressed as a series of inclined circular cross sections. The contact position of the roller and the workpiece is calculated from the inclination angle, center coordinates, and diameter of the cross sections, considering the geometrical shape of the roller. The blank shape and the target shape are interpolated along normalized tool paths to generate the numerical control command of the roller. By this method, we experimentally formed aluminum tubes into curved shapes with various radii of curvature, and the forming accuracy, thickness distribution, and strain distribution are examined. We verified that the curved shapes with the target radii of curvature can be accurately realized.

【 授权许可】

Unknown