Efficiency of Visual and Machine Strength Grading of Sawn Timber with Respect to Log Type

Forests

Piotr Mańkowski¹  Sławomir Krzosek¹  Izabela Burawska-Kupniewska¹ 

[1] Institute of Wood Sciences and Furniture, Warsaw University of Life Sciences-SGGW, Nowoursynowska 159, 02-776 Warsaw, Poland;

关键词: stress grading;    sawn timber;    mechanical properties;    MOR;    MOE;   

DOI  :  10.3390/f12111467

来源: DOAJ

【 摘 要 】

A batch of pine timber sawn from butt, middle and top logs was strength graded with the visual method (classification into grading classes KW—best quality, KS—medium quality, KG—inferior quality and Reject) and with the machine strength grading method—performed with the use of a mobile timber grader (classification into C strength classes). We compared the efficiency of grading classes and strength classes, depending on the type of log from which the material was obtained (butt, middle, top). Next, a strength grading machine was used to measure the modulus of elasticity in bending (MOE) and static bending strength (MOR). The ANOVA confirmed the influence of both the log type (butt, middle, top), the C strength class, and the visual strength grading class on the values of density (DEN) and MOR. Timber density and MOR decreased from the butt log section to the top log section. The ANOVA confirmed the influence of log type on MOE values, but only to a limited extent.

【 授权许可】

Unknown