Mechanically Alloyed CoCrFeNiMo0.85 High-Entropy Alloy for Corrosion Resistance Coatings

Materials

Cosmin Mihai Cotruţ¹  Florin Miculescu¹  Laura Elena Geambazu¹  Ioana Csaki¹ 

[1] Material Science and Engineering Faculty, University Politehnica of Bucharest, 060042 Bucuresti, Romania;

关键词: high-entropy alloys;    mechanical alloying;    coatings;    adhesion;   

DOI  :  10.3390/ma14143802

来源: DOAJ

【 摘 要 】

High-entropy alloys could provide a solution for corrosion resistance due to their impressive properties. Solid-state processing of high purity Co, Cr, Fe, Ni and Mo metallic powders and consolidation resulted in a bulk material that was further machined into electro spark deposition electrodes. After the stainless steel substrate surface preparation, thin successive layers of the high-entropy alloy were deposited and Pull-Off testing was performed on the newly obtained coating, for a better understanding of the adhesion efficiency of this technique. Good adhesion of the coating to the substrate was proved by the test and no cracks or exfoliations were present. Corrosion resistance testing was performed in a liquid solution of 3.5 wt.% NaCl for 6 h at room temperature and the results obtained validated our hypothesis that CoCrFeNiMo_0.85 high-entropy alloys could provide corrosion resistance when coating a stainless steel substrate.

【 授权许可】

Unknown