Multi-Stress Monitoring System with Fiber-Optic Mandrels and Fiber Bragg Grating Sensors in a Sagnac Loop

Sensors

Umesh Sampath¹  Hyunjin Kim¹  Minho Song¹ 

[1] Division of Electronics and Information Engineering, Chonbuk National University, Jeonju 561-756, Korea;

关键词: fiber Bragg grating;    Sagnac interferometer;    attenuator;   

DOI  :  10.3390/s150818579

来源: DOAJ

【 摘 要 】

Fiber Bragg grating sensors are placed in a fiber-optic Sagnac loop to combine the grating temperature sensors and the fiber-optic mandrel acoustic emission sensors in single optical circuit. A wavelength-scanning fiber-optic laser is used as a common light source for both sensors. A fiber-optic attenuator is placed at a specific position in the Sagnac loop in order to separate buried Bragg wavelengths from the Sagnac interferometer output. The Bragg wavelength shifts are measured with scanning band-pass filter demodulation and the mandrel output is analyzed by applying a fast Fourier transform to the interference signal. This hybrid-scheme could greatly reduce the size and the complexity of optical circuitry and signal processing unit, making it suitable for low cost multi-stress monitoring of large scale power systems.

【 授权许可】

Unknown