A Design for a Novel Open, Intelligent and Integrated CNC System Based on ISO 10303-238 and PMAC

Tehnički Vjesnik

Yu Zhang¹  Yutao Yan²  Yafei Yang²  Qifeng Zeng²  Guodong Mu²  Yadong Gong²  Wanli Song² 

[1] School of Mechanical Engineering and Automation, Northeastern University, NO. 3-11, Wenhua Road, Heping District, Shenyang, China, 110819 or Shenyang Blower Works Group Corporation, No. 16A, Development Road, Economic & Technical Development Zone, Shenyan;School of Mechanical Engineering and Automation, Northeastern University, NO. 3-11, Wenhua Road, Heping District, Shenyang, China, 110819;

关键词: intelligent CNC system;    ISO 10303-238;    PMAC;   

DOI  :  

来源: DOAJ

【 摘 要 】

The combination of the high-level data model called ISO 10303-238 with the open programmable multi-axis controller (PMAC) presents a vision for the open, intelligent and integrated computer numerical control (CNC) systems whose demands have been growing with the rapid development of modern manufacturing. Evolved from design philosophy, this paper proposes a novel open, intelligent and integrated CNC system based on ISO 10303-238 and PMAC. In the system, ISO 10303-238 is chosen as the numerical control (NC) data in order to make the CNC system interoperable. And the open master-slave hardware structure on the basis of industrial process computer (IPC) + PMAC with double central processing units (CPUs) is designed in order to make the CNC system flexible. Also, the open and modular software structure is designed in order to make the CNC system intelligent. In addition, the development of the prototype system is given. At the end, it has been verified by case study that the proposed CNC system is feasible and effective.

【 授权许可】

Unknown