Study on Representative Parameters of Reverse Engineering for Maintenance of Ballasted Tracks

Applied Sciences

Heechang Seo¹  Suyeul Park²  Seok Kim³ 

[1] BIM FACTORY Ltd., Seoul 03081, Korea;Department of Railroad Convergence System, Korea National University of Transportation, Uiwang-si 16106, Korea;Department of Railroad Infrastructure System Engineering, Korea National University of Transportation, Uiwang-si 16106, Korea;

关键词: ballasted track;    representative parameter;    reverse engineering;    point cloud data;    building information modeling (BIM);   

DOI  :  10.3390/app12125973

来源: DOAJ

【 摘 要 】

Reverse engineering (RE) is a technology used to create three-dimensional (3D) models by scanning structures and can be used to examine the current condition of structures. Applying RE to the maintenance of railroad facilities with a high proportion of safety accidents can be an alternative to increase the efficiency of railroad facilities. However, most tasks while constructing Building Information Modeling (BIM) after 3D scanning and extracting two-dimensional (2D) drawings are still performed manually. In particular, denoising, registration, and 3D modeling based on point clouds are labor-intensive and time-consuming tasks, and their efficiency needs to be enhanced by introducing automation technology. In this study, we selected point clouds-based representative parameters for ballasted tracks of a straight single-line section for automating railroad maintenance. Scan data and a BIM of a ballasted track were compared using the selected representative parameters. In addition, the types of damage to ballasted track requiring maintenance were examined. And a testbed was consisted of ballasted a track was selected, and 3D scanning was performed to obtain point cloud data of a testbed. Then, a BIM model was created by measuring the numerical values corresponding to the representative parameters on the scan data. The feasibility of constructing a railroad maintenance BIM based on representative 3D object detection parameters during RE work on the ballasted track was evaluated.

【 授权许可】

Unknown